CLUX-3D12S1A - 1×2 HDMI Splitter with 1 Audio-only HDMI Output

The 1 by 2 HDMI™ Splitter with integrated audio is fully compliant with HDMI and allows the output from any HDMI equipped device to be split allowing connection to up to two HDTV displays e.g. an LCD TV and a projector in the same room. The third HDMI output is an audio with blue screen output, which means it can be connected to an AV Receiver that does not support 3D signals.

(CLUX-3D12S1A, )

()

Specification

HDMI, HDCP1.1 and DVI 1.0 compliant
Deep Color video up to 12-bit, [email protected]/60Hz
One HDMI source to connect up to two HDMI displays simultaneously
One audio-only HDMI output connected to AVR
Splits a HDMI source to two outputs without signal loss
Supports DVI source and DVI display by using HDMI to/from DVI adaptor cable
Supports LPCM 7.1CH, Dolby Digital and Dolby Digital Plus Audio transmission (32–192kHz Fs sample rate)
Supports a wide range of PC and HDTV resolutions from VGA to WUXGA and 480i to 1080p
HDMI cable distance test with 1080p/8-bit or 12-bit resolution, the Input/Output distance can run up to 15 meters
Supports EDID functionality (This device will detect the video's EDID information based on HDMI OUT 1 and the audio's EDID based on HDMI OUT 3)

Inputs	1x HDMI [1x Uncompressed AV and Data]
Outputs	2x HDMI [2x Uncompressed AV and Data] 1x HDMI [1x AUDIO ONLY Uncompressed AV and Data]
PSU:	5V/1A
Dimensions	100mm [W] x 147mm [D] x 25mm [H]
Net Weight	300g