CSC-6012RX - 4K60 (4:4:4) 1×2 HDMI over HDBaseT Scaler with IR, RS-232, PoH (PD), LAN, OAR & Balanced Audio Extraction

This HDBaseT to Dual HDMI Scaling Receiver can receive uncompressed audio/video along with control, Ethernet, and extra audio data over a single run of Cat.5e/6/7 cable up to 100m. While the HDBaseT input is limited to a maximum of 4K@60Hz (4:2:0, 8-bit), this unit can automatically convert or scale the input to output at 4K@60Hz (4:4:4, 8-bit) depending on the detected capability of the connected display. Simple 18Gbps HDMI test patterns are also available to be output for easy testing of local equipment. Control of remote devices is possible via bi-directional RS-232 or IR as well as via a LAN connection. Digital OAR (Optical Audio Return) support at 48kHz and a balanced analog audio output provides users with additional audio flexibility. The 48V PoH design can receive power from the connected Transmitter (PSE), eliminating the need for a local power supply, however power via 5V power supply is also supported if needed.

(CSC-6012RX, PUV-1550SRX)

(PUV-1550SRX)

Specification

Supports the HDBaseT 1.0 specification
HDBaseT 5Play™ convergence: High-Definition (HD) Video and Audio, 100BaseT Ethernet, 48V PoH, and Control (Bi-directional IR/RS-232 pass-through)
Supports UHD resolutions up to 3840×2160@50/60Hz (YUV 4:4:4) & 4096×2160@50/60Hz (YUV 4:4:4)
Supports pass-through of all standard digital audio: LPCM 2.0/5.1/7.1, Bitstream & HD Bitstream
Supports RS-232 baud rates from 110~115200bps
10/100 Ethernet network support
Fully compliant with HDMI 1.4, and compatible with HDMI 2.0 (4K@60Hz, YUV 4:2:0)
HDMI with 18Gbps (600MHz) 4K support and HDCP 2.2 compliant
Supports Deep Color up to 1080p/12-bit
Supports DVI to HDMI conversion
Supports signal bypass on HDMI output (on the Transmitter)
Transmitter can upscale 1080p signals to 4K over HDBaseT output or downscale 4K signal to 1080p (same framerate is maintained)
Receiver supports signal bypass on both outputs or output B can upscale 1080p signals to 4K and output A can downscale a 4K signal to 1080p (same framerate is maintained)
Supports 4K UHD (4:4:4) to 4K UHD (4:2:0) conversion
Supports OAR (Optical Audio Return) and DAC balanced audio conversion
Test pattern generation at select resolutions for on-site display testing
Integrated EDID management
OSD with instant I/O resolution display

Inputs	1x RJ-45 [1x HDMI & Propriety Data] 1x TOSLINK [1x OPTICAL 2 Channel LPCM] 1x 3.5mm [1x Infrared Receiver] 3x 1-Pin Terminal Block [1x RS-232]
Outputs	2x HDMI [2x Uncompressed AV and Data] 1x Terminal Block 5-pin [1x Stereo (Balanced)] 1x 3.5mm [1x Infrared Emitter]
PSU:	5V/2.6A
Dimensions	231mm [W] x 117mm [D] x 25mm [H]
Net Weight	670g